Mike writes:

Hi Sajeev.

I have a 2007 Volkswagen City Golf with a 2.0-liter and a five-speed manual. It has about 60,000 kilometres (37k miles) and obviously doesn’t get driven very much. My independent mechanic suggested that the timing belt be changed because of the age of the car. He says it is an interference engine and bad things could happen if the belt breaks. I’ve read about others where this has happened, and the cost to fix it. I would like to get your opinion. (Read More…)

Sam writes:

Dear Sajeev,

After reading TTAC for many, many years I succumbed and finally got me some panther love. It blows my mind that Ford can make such a well-balanced, corner-carving sedan and then never sell it to civilians. I traded my 2006 Mazda 3 for a 2006 Police Interceptor Crown Vic (170,000 miles). The aftermarket exhaust makes it growl and it parts the sea of entitled BMW drivers hogging the fast lane like a dream. Unfortunately, due to living in glorious urban hellscape that is Oakland, I have to pass smog regularly. (Read More…)

TTAC commentator Halftruth asks:

Hey Sajeev,

This question came across my mind recently whilst reading all of the sedan death watch articles on TTAC. What happens to all the tooling and hardware when a model is discontinued/killed off? Can any of this stuff be recycled/redeployed?

Consider the Chryco 200, discontinued after 2 years. Will FCA mothball that stuff or throw it out or… something else? (Read More…)

Jay writes:

Sajeev,

I’ve been enjoying your work on TTAC for several years and (unfortunately) have run into a situation where I think I need your help.

After reading Mark’s review of the Ford Flex several years ago, I test drove and fell in love with one — a 2012 Titanium Ecoboost model, to be precise. Fast forward to last month, and I am driving down I-395 when the car starts to lurch; $1,900 later, I have a new fuel injector and a picture of a leaky turbo (rrg). In hopes that Ford would have some type of pity on a 5.5-year-old car with only 53K miles on it, I took it to the dealership. $167 later, we’ve added a transmission seal issue to the running list and they’re asking more than $5,000 to square everything away.

I’m hoping you have a magic bullet for this one or, barring that, something snappy to say that will make me laugh. (Read More…)

K.P. writes:

Hi Sajeev,

It’s the time of year to start tossing out little-used items so we can get more to replace them. One place I’m looking at is the car. I recall my stash of trunk tools back in the dinosaur years while driving the kind of cars I could afford then:

1. Duct tape for interior tears, dropped ceiling linings, fixing plastic over windows that dropped off tracks, etc
2. Pack of “L’eggs” panty hose as temporary water pump belt
3. Wire clothes hanger as spare exhaust pipe clamp or antenna
4. Can of WD-40
5. Long Craftsman slot screwdriver to pop off distributor cap, prying tires, etc
6. Lug wrench and two-foot pipe as lever (also as protection device)
7. Couple of flashlights with huge 6V batteries
8. Visegrips as combination wrench, hammer, and spare window crank for when your little brother yanks the handles off
9. Bottle radiator leak stop
10. Tire repair kit with rubber plugs
11. Blankets and food in winter (since without cell phones it could be a while until rescue)

It’s been years since I’ve thrown a belt or had a flat tire, which makes me think it’s time to update what I keep on hand in the car on cross-country trips. What’s prudent nowadays? (Read More…)

Ted writes:

Hi Sajeev,

I’m about to get a new Golf R and everyone complains about the boring VW Golf design thingamajiggit. Yes. I find the boring classic outside to be comforting. I’m in it for the longevity of the design and body, and want to keep this until it dies or 10 years; I intend to ceramic coat the Lápiz Blue. It’s a manual, of course, and when the clutch eventually dies I may replace with a tougher version and chip it.

What I don’t like, and a major strike against the R in my mind, is that the interior is so dark as to make the interior basically invisible. (Read More…)

Ryan writes:

Hi Sajeev,

I have a problem with the air conditioning not functioning properly on my ’89 Ford Taurus LX equipped with Electronic Automatic Temperature Control (EATC).

When I start the car on a warm day the AC can blow icy cold air immediately, but the temperature gradually rises to ambient temperature by the time I reach the freeway, and is bad enough that I turn the EATC off. When I turn on the EATC by pressing AUTO, it often feels like it’s blowing maximum heat. I have noticed that when this happens the AC compressor clutch is not cycling on and off. During the winter, the AC compressor clutch clicks on and off. The problem seems to be intermittent and only occurs during warmer months. Also, during startup, you can hear an audible “whirring” noise in the dash, and that started to sound abnormal about the same time the AC stopped working. By “abnormal” I mean it lasts much longer than it used to. I believe the noise I’m hearing is the temperature blend door being moved so the EATC knows the position of the blend door. (Read More…)

TTAC commentator PandaBear writes:

Hi Sanjay, (First Sanjeev, now we’re using my brother’s name? – SM)

I have a ’97 Acura Integra RS on which my mechanic recently did a top end rebuild. The radiator got stuck closed and somehow created a vacuum in the cooling system, overheated and warped the head. Soon after the rebuild a new grinding noise started and the mechanic isolated it to a failing water pump bearing. Before the rebuild my car had a noise that I thought might be exhaust or valvetrain related, but ended up being the failing water pump. After the water pump was replaced the car is a lot quieter, and because it is a lot quieter, I’m now hearing cold start piston slap that I never heard before.

The cold start piston slap seems to remain till the engine is completely warmed up. It seems to come when the outside temperature is about 50F or lower. The car has about 260k original miles and is in OK condition, and I’ve replaced the ignition coil, radiator, axles, struts / shocks, hoses, oil pan gasket, so far so it actually drives OK for its age (kind of hard as the bushings are old). How much should I worry about the piston slap if all I care is durability of the engine? My goal is to daily drive another 5-10 years and 100k miles out of it if possible without a rebuild or an engine swap.

(Read More…)

Sanjeev writes:

Hello Sajeev, I am Sanjeev.

I moved to Michigan last year and have been driving a used 2006 Corolla. I can definitely afford a better car, but this one is serving me good. Agreed that it doesn’t have all the needed electronics and sex appeal; I am not swayed by that. The recent snow (about six inches) in Detroit area made me think of buying a car with needed ESC, ABS for better handling and driving. I have heard, read a lot about FWD and AWD cars and their handling on snowy roads but haven’t fully comprehended RWD cars on a snowy road.

Many online articles generally suggest that RWD is a bad idea during winter. Still, I see many of many colleagues driving RWD 300s, Durangos, and CTSes. Is RWD better or not on snowy roads? (Read More…)

Chris writes:

Hi Sajeev,

Love the column, it’s one of the things that keeps me coming to TTAC daily. I recently purchased a 2017 Ford Edge SEL AWD with the 2.0-liter Ecoboost. I love it so far but there is one glaring issue. The projector beam halogen headlights are simply awful, I can’t believe they left the factory this way. What are my options? Brighter Halogen bulbs, LED Bulbs or an aftermarket HID kit?

Help! I’m almost totally in the dark here! (Read More…)

TTAC Commentator Arthur Dailey writes:

Sajeev, 

As I look outside a the terrible weather, I felt it was opportune to ask you (and the B&B) a relatively simple yet timely question about preventing car door freezing: door handles, windows, etc, during the freeze and thaw cycles that we are increasingly experiencing.

On Sunday our temperature reached a record low of – 22C but on Thursday we had driving rain and a record high of + 10C melting all the snow. Friday we are dropping to – 13C with high winds and freezing rain/sleet/snow. All of these freeze thaw cycles play havoc with our autos. 

The high temperatures combined with the salt used to keep the roads less icy results in rusting. Perhaps less serious but just as frustrating are the freezing of windows, doors, door locks and door handles. (Read More…)

Having previously discussed Day Light Opening (DLO), let’s define DLO FAIL.

And perhaps learn why DLOs sometimes fail?
(Read More…)

Stefan writes:

Sajeev,

We just had the drive shaft replaced on my wife’s 2008 Chrysler Pacifica AWD (no, not the new minivan — the old crossover). It’s been a good and reliable car in spite of its less than sterling reputation, and we have a little over 100,000 miles on it. The 4.0-liter engine with the six-speed transaxle delivers plenty of pickup and all was well until the (center) driveshaft went bad and we had it replaced by our trusty independent auto repair shop.

The problem lies with the new drive shaft, which shudders at low speed when you accelerate and moans between 40-50 mph. The shop can’t figure out what it can be and what to do.

So, what’s your take on the situation? Can you and the B&B provide some insight in this matter? The vehicle is well cared for otherwise and in excellent condition. I am inclined to keep on driving, since you don’t get much for them as a trade-in — but maybe it’s time to think of a replacement? What says you?

(Read More…)

Felix writes:

Got a Mazda 3 hatch to replace my 29-year-old MR2, and while it’s no MR2, it has its own benefits. But I detest Hill Launch Assist, and the power steering is the biggest reminder that it’s no MR2.

The Mazda power steering is better than I expected, but it’s still the first thing I notice when I start it up and always makes me want the MR2 back, three years later. I tried turning the engine off on a private road with just enough slope to keep moving, and it’s kind of scary to imagine that happening on a freeway, it’s so stiff and jerky. Is there any way to disable it and having just plain manual steering, to see what it’s like?

As for Hill Assist, what annoys me the most is not knowing if a slope is enough to trigger it or not; if I expect it, and it didn’t engage, there’s a tire chirp for no reason, and if I don’t expect it but it did engage, I sometimes kill the engine unless I’m paying attention. I can understand its attraction for weenies who are just learning stick, but I don’t need it and don’t want it. (Read More…)

Mike writes:

Ok Sajeev, I got one for you.

I own a 2009 Nissan Xterra 4wd X model.  It has nearly 100k miles on the clock.  In the past week, whenever I start the vehicle, I hear a chattering noise coming from the passenger side dashboard.  The noise persists as long as the passenger air bag light is lit; when that light goes off, the chattering stops.  So I took the truck to my local Nissan dealer, whom I trust, and I was told that the problem is the passenger side blender door of the HVAC system – apparently there are gears in this assembly which are not moving freely or properly. 

The cost to repair is estimated at about $600 because of the necessity to remove the whole dashboard.  The dealer’s service people told me to do nothing until the HVAC system fails to function properly, and it is currently functioning properly except for the above described noise.  My question: how is a bad blender door mechanism linked to an airbag light?  Can airbags chatter on vehicle startup?

Thank you as always for your excellent advice. (Read More…)