Category: Piston Slap

By on October 17, 2011

 

seekersofthebat.com

Bill writes:

Hello TTAC crew!

My Mom is in need of a new car. The problem is her trade in: It is a 2002 PT Cruiser with a serious overheating problem ($1700+ quote at two reputable repair places) Now here is the problem. Do I keep my dang mouth shut when we go to the dealership and do the deal? I have a spare car that she is driving until it cools off and the overheating problem will not be noticeable at trade in.

I would never sell the car to a guy off the street without disclosing a major problem. Even to a car dealership I think I feel guilty in not disclosing it. We are not going to be financing, and will be paying cash for the car. So it is not like they can unwind the deal if they discover the problem.
Having ethical dilemma about screwing over a car dealership who exist solely to try and take as much money as they can from you in every conceivable way is weird.

Bonus question. These are the three cars we are considering Hyundai Elantra Touring, VW Jetta Wagon and Ford Focus Wagon. Any recommendations of the three or reasons to avoid them?

Thanks in advance for any help!

Read More >

By on October 12, 2011

 

 

TTAC Commentator Benderofbows writes:

Sajeev,

I always enjoy reading Piston Slap and want to ask about my truck, a 2007 Nissan Frontier with the VQ40DE (4.0L V6), 6-speed manual, and 42k miles. Sometimes the truck will rattle while accelerating at around 2200 RPMS. This only happens after completing a long freeway run (an hour or more) and occurs in every gear regardless of throttle position. The noise goes away after a few shifts or always after the truck has been shut off and restarted. It has been going on for 6 months or more (it took me that long to figure out how to duplicate it) and doesn’t seem to be getting any worse, plus it doesn’t trip any check engine lights. I can’t imagine how to replicate the noise for the dealership service department. Any ideas? Computer issue with the air/fuel mix maybe?

Read More >

By on October 10, 2011

 

 

TTAC commentator sastexan writes:

Sajeev,

You proved yourself smart by changing over to the older rod shift transmission linkage on your Cougar SVT. My shift cables are broken again – although this time probably due to the 1st mechanic’s ineptitude and unwillingness to finish the job he started and align it correctly. The end that attaches to the shifter is worn out so the shifter keeps popping off the cable end – which was interesting to reconnect while I was driving in stop and go traffic on the (in)famous Washington Beltway. Unfortunately, the plastic insert on the Contour cables is not replaceable – the only way to fix it is to replace the entire cable set – which is a giant PITA. Oh well.

I also talked to Terry Haines, the transmission guy – if you haven’t heard of him before, he’s a former Ford engineer who has his own shop now, mostly working on MTX75 transmissions. He rebuilt my transmission at 100k, upgraded the shift forks, put in a quaife, replaced two syncros that were going bad. He walked me through the procedure to replace the shift cables (more than I can handle) and we also discussed why the Duratec V6s are puking rods – he unequivocally believes that it is due to the powdered metal connecting rods Ford started using around ’97 – he said that some spec must have changed because earlier Duratec have no con rod issues. In his teardown of motors, he said all the ones that have thrown rods had nothing to do with oil starvation – it all had to do with the con rods stretching out of spec and causing spun bearings then snapping the con rods. He also said SVT engines are more susceptible, due to higher compression and typically harder lives. And he said that the 3L upgrades everyone is doing has the same con rods and is just as at risk – Ford just ignored the problem in the Duratec.
Since you have plans for your Cougar, thought you would be interested in this line of thinking.

Sajeev answers: Read More >

By on October 6, 2011

TTAC commentator horseflesh writes:

Hi Sajeev,

Many moons ago you posted a question of mine on Piston Slap. As requested, today I can share the conclusion of the saga!

I actually wrote almost 1300 words on the story of Grandma’s Park Avenue for my own amusement, and to share with my friends. If you wanted to run all or any of the material on TTAC, you are more than welcome. I pasted it in below after the quoted old email. At the least, I hope you enjoy reading it!

Read More >

By on October 3, 2011

Since there are multiple TTAC Hacks on assignment here at the 24 Hours of LeMons, you’re getting into the mix from multiple angles. And, here in the Piston Slap corner of the world, the Cars are the Stars! But some whips simply have too much going on: feats of engineering superiority, a collection of creative/rare parts and a dump truck full of historical irony. That’s right, historical irony…with a touch of revenge!

Read More >

By on October 1, 2011

Perhaps you already know a little about this car from a previous post, but let’s look a little deeper into what makes an engine swap in a Fiero so positively epic.

Read More >

By on September 28, 2011

Scott writes:

I am a regular TTAC reader and have a question that I hope you can shed some light on. Currently my wife and I own a 2004 Accord with about 100,000 miles and in good shape and a 1993 Grand Marquis with about 90,000 miles which is also in good shape for its age – according to my mechanic we can get at least two more years with basic maintenance. I commute to work in the G. Marquis every day about 50 miles round trip and my wife put 15-20,000 miles per year on the Accord for her job (her Gas is reimbursed at 50 cents / mile).

My wife wants a new car (SUV-we’re thinking FLEX) and I would get the Accord thinking we move up in fleet reliability with more room to tote around a toddler, a large dog, and related items. The Accord has trade in value ($8,500 – $9,500 according to KBB) and the G. Marquis does not ($875-$1,100 according to KBB).

I think it makes more sense to keep the Grand Marquis as long as we can and trade in the Honda considering its value. My wife disagrees. What do you think?

Read More >

By on September 26, 2011

 

 

John writes:

I have a 1989 Mercedes 300CE. Fantastic car, if I’m honest and it has made me fall in love with straight-6’s as well as old school German solidity. Not to mention it is nice having the only seafoam green Mercedes I have ever seen, making it incredibly unique. That being said, in the 6 months that I’ve owned I’ve had to put almost two thousand dollars into it for various wear parts. While it is to be expected with a 22 year old car of any ilk, the added cost of owning a European car have begun to take their toll I’m afraid.

Read More >

By on September 22, 2011

Matt writes:

Hey Sajeev. Looking for your wisdom, or perhaps that of the B&B. I’ve got a 2005 Hyundai Elantra with about 50k miles. Back around 40k, we had new tires put on it at Sears. Now I want to rotate the tires (yes, I know, I should have done this a while ago), but when I got to the very last wheel, I ran into a roadblock. The rear right wheel is fused to the hub! It seems to be rusted on. Poking around a few forums online, I got a couple of ideas:

Read More >

By on September 19, 2011

 

Still The Ultimate...

 

Jul writes:

Hey Man, I’d like to have your opinion: What do you think of the E39 M5?

Let me rephrase: What would you think about a 98000 miles absolutely mint condition, owned by an older gentleman with 3 or 4 other cars (the E39 not being his daily driver), with VANOS changed, clutch changed, and everything that could break down been changed as a preventive measure, E39 M5? … For $15K?

Wondering if I would treat myself to a potential money pit here buying this beast (that I already test drove, I’m in Love) knowing that I will not be driving it more than…5000 miles a year for the next two years MAX!

THANKS!

Read More >

By on September 14, 2011

 

 

Sajeev writes:

I received a brief but telling email from Mr. Hussam Adeni about a previous Piston Slap. The attachments he sent were an eye opener for someone as chemically challenged (so to speak) as yours truly. As you can see from the man’s resume, this won’t be a discussion for the faint of heart.  But let me try anyway, it is a great read if you can channel your inner geek long enough in this age of twitter and rapid fire auto-tuned pop sensations.
Read More >

By on September 13, 2011

 

Stay Classy, Honda!

 

TTAC Commentator Anchorman33 writes:

Hello Sajeev,

Love TTAC, and the Piston Slap series.  I’m not a fixer, mainly because of time and space, but knowing a community like the B&B/TTAC is out there definitely makes me think about my automotive choices more than I ever did before.

I’ve got a 2006 Honda Odyssey that’s coming due for it’s 105k mile service.  I’ve had it for about the last 3+ years and done basic maintenance, to include changing the brake and transmission fluid about 10k miles ago.  don’t know when/if they had ever been changed before.  It’s been in at least two wrecks, rear ended before I bought it and not fixed properly – the driver’s side rear bumper has about a 6″ bolt holding it on; and side swiped on the drivers side about 18 months ago, fixed properly.  I  Overall it’s an ok ride,but definitely showing it’s age cosmetically and mechanically.  The current plan is to keep it for another 6-8 months and replace it with a new(er) van that’s a keeper.

The local independent shop (SoCal) is quoting me $1100 for the timing belt, water pump, radiator hoses, fluid and oil change.  Local dealer is saying $1850 for all that plus valve adjustment.  My question for you and the Best and Brightest is, how big of a gamble is it to just change the oil and hope the rest of the items can make it 8-12K more miles?  I obviously don’t want to blow up the motor, but I’m having a hard time swallowing that much cash outlay on an older than its age/miles would suggest vehicle that I’m planning on getting rid of in less than a year.  Thanks. Read More >

By on September 13, 2011

 

Ryan writes:

I have a friend who just got her PhD and is moving to Texas for her post-doc. She has never owned a car, but now needs to get one so she can go out in the field to do research. I’ve agreed to help her find something used, probably a small manual-transmission pickup truck. Needless to say she’s not a car person at all, just wants something inexpensive (under 5k), that she won’t have to worry about too much. I’m recommending something after 96 or so, to get the R134A A/C and maybe a few more airbags and safety features.

I have owned a couple Nissans (Frontier and Rogue), and a Toyota Tacoma, and my brother owned a Nissan Frontier, all were mostly problem free. I also had a 91 Ford Explorer before that, which also gave me few problems up to 200k miles.

Given my experiences, I’ve been thinking Tacoma or Frontier for my friend, I think they will be more reliable at the high mileages she can afford. But looking in the local (Phoenix, AZ) Craigslist – By Owner section, I see that Tacomas are relatively more expensive, older Frontiers are cheaper but less common (many are also heavily modified), and there seem to be lots of less expensive Ford Rangers available.

Do you agree with the 96 or later idea? Or do you think something older could work? What about the Ranger’s reliability as opposed to the imports? Also, are there any other models with a proven track record she should consider? And finally, given that a 10+ year old truck with over 100k miles is going to need maintenance no matter what, what about parts availability and ease-of-maintenance between the brands? Read More >

By on September 8, 2011

Fabio writes:

Hi Sajeev,

I have been asked by an uncle if I would like to his 91 Mercedes 300E (he has supplied all of his children and is now moving to the extended family). It has 230K km (140K miles) and looks to be in pretty good condition. He’s mentioned that it has been very reliable. The purchase price would be negligible and the insurance is reasonable. One of my concerns is that I would be using the car as my daily driver (it would be replacing my current 99 Grand Am (170K miles) and I wanted to get another take on that – is it reasonable, or is it not a good idea.

I’ve read a bit up on that vehicle and it seems to have a decent reputation for longevity (with the required maintenance). I was hoping if you could provide some insight as to whether this seems like a feasible idea, or would I just be better off sticking with the Grand Am.

Read More >

By on September 6, 2011

It actually comes with a little book too!

Patrick writes:

Hi Sajeev,

Avid daily reader of the site but infrequent commenter… Pony Cars and old Volvos sometimes drag me out of my shell but I have a couple questions about my wife’s car and I wanted to see what you and others might think.

We’ve got a 2007 3.5L Impala with 60,000 miles on it and it is due for an oil change and checkup:

Read More >

Recent Comments

  • Lou_BC: @Carlson Fan – My ’68 has 2.75:1 rear end. It buries the speedo needle. It came stock with the...
  • theflyersfan: Inside the Chicago Loop and up Lakeshore Drive rivals any great city in the world. The beauty of the...
  • A Scientist: When I was a teenager in the mid 90’s you could have one of these rolling s-boxes for a case of...
  • Mike Beranek: You should expand your knowledge base, clearly it’s insufficient. The race isn’t in...
  • Mike Beranek: ^^THIS^^ Chicago is FOX’s whipping boy because it makes Illinois a progressive bastion in the...

New Car Research

Get a Free Dealer Quote

Who We Are

  • Adam Tonge
  • Bozi Tatarevic
  • Corey Lewis
  • Jo Borras
  • Mark Baruth
  • Ronnie Schreiber