If the thought of a four-cylinder BMW gives you the creeps, then this will cause chronic dermatitis: BMW is thinking of putting three-cylinder engines into vehicles sold in the United States. Read More >
Find News by Subject:
Category: Engines
755,507 miles.
This Ford F250 has truly lived up to all the rigors of what a long lasting truck represents. Mileage beyond the moon. Scuffs aplenty. Vinyl seats. Not to mention an engine and powertrain that truly stood the test of time.
Starting with the redesigned 2013 Accord, Honda will introduce its new, ultra-efficient/more powerful Earth Dreams engine lineup. And it’s far from the most silly moniker attached to automotive technology.
It is a little bit like showing breasts at a plastic surgeon congress: At the annual meeting of the JSAE, the Japanese version of the Society of Automotive Engineers, Subaru totally disrobed its BRZ and shows it to a strictly professional audience. Read More >
A topic covered before, but clearly worth covering again…
The author: Georg Kacher, seasoned European bureau chief for Automobile (i.e. not a newb)
The place: page 31, April 2012 issue
The car: Bentley Continental GT V8
The statement: “Alternatively, you can work the shift paddles to keep the engine revving between 4000 and 6300 rpm, where the power and torque curves approach, intersect, and then run almost parallel to the limiter.”
The car industry is under pressure to improve fuel efficiency. It is not that they have been sitting on their thumbs. Automakers have achieved large increases in fuel efficiency through better technology in recent decades, says MIT economist Christopher Knittel.
The problem is:
“Most of that technological progress has gone into compensating for weight and horsepower.”
General Motors announced changes to the Chevrolet Volt’s design after a NHTSA investigation into why a Volt caught fire following crash testing.
The changes will go into effect once production restarts at the Hamtramck, Michigan facility, but customer cars already sold will follow a different protocol.
There was ample hand-wringing when Volvo announced the death of their iconic station wagon in North America. While enthusiasts mourned the death of a cult classic, Volvo also announced a plug-in hybrid version of their V60 wagon, powered by a diesel engine and a hybrid drivetrain. Naturally, this vehicle was not destined for sale in North America.
The non-available V60 plug-in constituted the ultimate slap in the face for the Volvo faithful. Here was the newest generation of Volvo wagon (as opposed to the warmed over XC70 offered recently) with an environmental bent and the Euro-cachet of a diesel engine – but where was it? As Jamie Kitman of Automobile magazine rightfully pointed out, their core buyer is “green” but refusing to import such a vehicle may not be “lunacy”, because the Swedes have something more suited for American tastes – the same hybrid goodness, packaged as a gasoline-powered crossover.
Need an engineering project? Got 1,200 hours to kill with nothing to do? Take a tip from this heroically patient Spaniard, and hand-machine your own tiny (12 cc displacement) V12. This would be amazing feat of handwork even if it weren’t fully operational (using compressed air injection), but the fact that it works, runs and was made without a single CNC machine is nothing short of astounding.. If, as the book suggests, Shop Class is Soulcraft, this guy is like an engineering bodhisattva, inspiring us with his precision, patience and skill. In a world where not much is made by hand anymore, this achievement is worth taking a few minutes to marvel over… [Hat Tip: Dean Huston]
It’s been a few years since we last detected much of a pulse from Honda [Ed: in fact, Paul Niedermeyer declared Hyundai the “new Honda” in terms of engine technology leadership way back in 2009]. But just when we were wondering if all hope was lost, and that it might be time to pull the plug…signs of life. In Japan, for the Tokyo auto show, Honda has unveiled ambitious new powertrain plans [via Automotive News [sub]].
With engine management technologies creating ever-more refined, well-behaved engines, the snap-crackle-pop overrun at the beginning of this video is an increasingly rare throwback to the time when men were men and engines could blow up at any second. Sure, such playfulness will probably be managed out of existence by the time the F30 M3 hits dealerships, but it seems like a good omen for the M3’s return to six-cylinder power. In fact, it might even be possible that the backfire heard here has something to do with the electric turbocharger that’s rumored to give the new M3 lag-free turbo performance… but then you’d probably be a better judge of that than I.
Last Monday, we regaled you out with stories of Toyota coming to grips with the “new peak oil,” and other topics related to the growing gap (or lack thereof?) between global production and consumption oil. This week I’m feeling a little less apocalyptic, and little bit more indulgent. And really, why not celebrate those precious hydrocarbons while they’re still cheap and plentiful? This Mercedes SLS AMG Black Series may burn ’em by the bushel, but it sure sounds good doing it. And though cars like the forthcoming 650 HP Shelby Mustang GT500 prove that performance is still alive in the 21st Century, high-revving, large-displacement, naturally-aspirated V8s like the AMG Black’s are going to be facing special challenges under future emissions standards. Which makes its gargling, chortling music all the sweeter to my ears…
It’s no secret that Ferrari has been wrestling with the inevitable conflict between its bellowing V12s and European emission regulations, but that’s not the only challenge facing the Prancing Horse’s powertrain division. Sure, there’s the increasingly-tenuous link between the Scuderia’s Formula One technology and its road cars [sub], but in the short term that actually helps the emissions issue by creating a pretext for bringing KERS to the road (where it otherwise has little role). In fact, the real issue for Ferrari’s powertrain team is not even a “Ferrari issue” at all, but a Maserati issue.
BMW hasn’t offered a four-cylinder engine in the U.S. for quite some time, so I was eager to check out their new 2.0-liter twin-scrolled turbo. A Z4 so equipped arrived in my driveway today.
Not to give too much away prior to the full review, the new 240-horsepower engine works very well when paired with a six-speed manual in the 3,263-pound Z4.
Then I broke it.
Of all the Japanese automakers, none are as far behind on hybrid technology as Nissan. For some time there was a sense that Nissan’s (relatively) huge investment in electric vehicle production would represent a “leapfrogging” of hybrid technology, but now the firm is using the common industry response to questions about future technology: a suite of options, rather than one single technology, will meet tomorrow’s low-energy transportation needs. As a result, Nissan’s been playing catchup, as it admits in a recent press release [PDF]
“We must have a tougher job than any other hybrid team in the industry,” says Mitsunobu Fukuda, a senior powertrain engineer at NATC. “Because our CEO, Carlos Ghosn, used to be known as skeptical about the value proposition of hybrids we had to make a really compelling case that we could deliver value to customers to get him to validate a hybrid program.
In 2004, as a stopgap measure, Nissan licensed hybrid technology from Toyota for use in certain markets.
“It was a bit of a blow to our pride, but that was the right thing to do under the circumstances,” Fukuda says.“Instead of rushing out a ‘copy-cat’ hybrid we wanted to take the time to develop our own hybrid, one that is clearly different – and better. I think we’ve managed to do that.”
What makes Nissan’s forthcoming hybrid system so different? For one thing, it uses Nissan’s “one motor, two clutch” system (currently found only on the Infiniti M Hybrid), which enables a compact design. For another, it’s supercharged.
Recent Comments