When the year 2025 comes around, and your sons and daughters purchase their autonomous commuter pod sans steering wheel, you may want to check the automatic brakes just to be sure they’re able to stop your children from smashing through the commuter pod in front of them, much like what happened to one customer during a test drive at a Mazda dealership in Japan over the weekend.
Four months ago, when we last looked into the U.S. compact car sales battle, the Toyota Corolla (including the Matrix hatchback offshoot with which Toyota combines Corolla sales figures) was the class leader. Yet the expiring Corolla’s lead over the Honda Civic was slim, and it didn’t seem promising.
The contrarian in me loves it when conventional wisdom is proven to be not so wise. For decades, even before the first oil crisis of the 1970s, motorists have been told that making sure that your air filter is clean is one of the ways that you can improve your fuel economy. It’s intuitive to think that a clogged air filter will affect the way an engine “breathes”, how efficiently it can get gases in and out of the combustion chamber and how that might decrease fuel economy. That may have made sense decades ago, however it turns out that two different studies, one on gasoline engines and the other on diesels, performed by a team at the Oak Ridge National Laboratory, show that the fuel economy of modern, digitally controlled fuel injected engines isn’t significantly affected by the state of their air cleaners’ cleanliness. What made sense in the era or carburetors may no longer be applicable today. Apparently the engines’ ECUs working to keep emissions in spec are capable of leaning out the fuel mixture to account for a dirty air filter restricting airflow into the engine, resulting in insignificant drops in fuel economy. Though dirty air filters didn’t materially affect fuel economy in the modern cars, they did experience a decrease in acceleration performance so it’s still a good idea to replace a dirty air filter.
Abstracts of the studies after the jump. Read More >
Reports out of South Korea are confirming the news that French car enthusiasts have been waiting on for decades: Americans will soon be able to buy French cars again, with Renault Samsung confirming that the first Mitsubishi-branded product exported to America will be the Renault-Samsung SM5.
Readers of our departed EIC’s chronicles will no doubt understand that building a luxury brand is a gradual, concentrated effort that won’t bear fruit for many years. Over at Audi, it took Herr Schmitt and Herr Piech the better part of two decades to morph Audi from an oddball line of tarted up Volkswagens into a global luxury player, and that journey was not without its own mishaps.
Some time ago, I ranted on these pages about European methods of testing fuel mileage (and thus also CO2 emissions), and the way they give unfair advantage to downsized turbocharged engines, compared to good old N/A units. So it’s quite convenient that for my first TTAC European review, I got a Škoda Rapid, powered by a 1.2 TSI turbocharged four-cylinder – a typical example of downsized powerplant. With the Rapid being a relatively small and light family car, the little four-banger may have an opportunity to really shine, and show us whether downsizing works. Or not.
Leave me here
Race Day.
The day prior, we had traded Chad for Susan, today we traded Susan for Joe. Clearly we are trading down; hopefully Sian would be there and brighten the day. The gates don’t open until 11, and after the last three late nights and (relatively) early mornings, we can use the rest.
The opening event is the 2nd GP2 Race. It’s the same as the last three days, the sights the sounds and the smells are getting routine.
It’s said that imitation is the sincerest form of flattery and you can usually tell that something is a practical idea from the number of people who rush to embrace it. Threatened lawsuits over who owns the idea are also a clue that there may be potential in it. When the DeltaWing concept was first introduced at the 2010 Chicago Auto Show as a possible formula for IndyCar, Ben Bowlby’s needle-nosed idea had a lot of skeptical reactions. Now it has imitators including an “exploratory prototype” of a possible production car by Nissan, to be introduced soon at the Tokyo Auto Show. Read More >
The Tokyo Motor Show is always good for an unusual transportation device or two and this year’s show looks to be no exception. Toyota will be debuting the FV2, which appears to be a cross between a leaning trike, a jet ski and a horse. That’s right, a horse. The FV2 is supposed to connect the driver physically and emotionally to the driving experience and it is controlled by the rider’s body motions. Shifting the driver’s body will cause the vehicle to move forward, backward, left or right. Toyota sees the driver and FV2 developing a relationship similar that between a rider and a horse, with the FV2 learning the driver’s behavior. The vehicle even uses voice and image recognition to analyze the driver’s mood and suggest destinations.
Photo courtesy of curbsideclassic.com
My 1974 Nova was as utilitarian as they come. It was a low optioned base model with a 250 CID inline six mounting a one barrel carb and backed by a three speed manual with a column mounted shift lever. It had so few options that on the inside it had a rubber floors, vinyl seats and a pegboard for a headliner. Outside there was no decoration, nary a pinstripe nor so much as a strip of trim to protect the car’s flanks from door dings. It was a plain, gutless, spiritless little car that inspired no passion or love from anyone other than the 17 year old boy who owned it. To me it was, and still is, one of the greatest cars ever built. Read More >
Photos: RM Auctions
Back in 2011, as part of its reorganization, Italian design house Bertone auctioned off some of its collection of concept cars in conjunction with the Villa d’Este concours that year. Marcello Gandini’s Lamborghini Marzal, with it’s glass gullwing doors, and its $2,170,369.10 USD sale price, got the lion’s share of the attention in that sale, but one of Giorgetto Giugiaro’s creations also on sale that day, the 1963 Chevrolet Testudo, may have been a more influential design in the long run than the Marzal. Testudo is Italian for turtle, an allusion to the sharp beltline separating top and bottom halves of the car. Though I can see the testudine influence, I’ve never seen a tortoise or turtle look this sleek and fast.
There’s nothing the internet loves more than some good clickbait, and the hype surrounding Dodge’s ads featuring Ron Burgundy, star of the Anchorman movies, and the Durango CUV, are perfect fodder for this type of content. Web publications like Mashable, along with numerous auto blogs, have run articles cliaming that the Anchorman-themed ads have caused Durango sales to “skyrocket”. But as Tim Cain shows us, correlation does not necessarily equal causation. Durango sales have been on the rise for some time now. But never let the facts get in the way of a good story.
A study by Edmunds on the buying habits of millennials shows that 2013 was not a particularly good year for young car buyers. Despite making good headway in 2012, 2013 saw those gains practically eroded, as a weak job market and rising home prices helped stymie any growth in market share for automotive consumers aged 18-34.
A tailgater is a bully par excellence and his weapon is the “I’m not touching you” game. You remember that game, don’t you? It’s the one where your older brother tries to hit you as hard as he can but always manages to miss by a fraction of an inch. When you flinch or complain to your mom the refrain is always the same: “I never even touched you.” Of course, to keep things interesting, sometimes he does actually hit you – if he always missed you’d have nothing to fear, right? On the road the game is almost exactly the same and nine times out of ten the bully never hits you. But once in a while – once in a great while – it’s “metal up your ass.” Read More >
Solid Concepts, a 3D Printing services company, has announced that it has successfully manufactured a functioning 3D printed metal gun. To produce the more than 30 parts needed to assemble a classic 1911 design, Solid Concepts used a 3D printing process that deposits powdered metals that are then sintered with a laser. The result is metal parts that are hard enough to withstand the stresses and high pressures found in a firearm. The gun is made from 33 17-4 stainless steel and Inconel 625 and has successfully fired 50 rounds. Even the carbon-fiber filled nylon hand grip was 3D printed, using “selective laser sintering”. Solid Concepts says that the project proves the viability of 3D printing of metal parts for commercial applications. Read More >
Recent Comments