Though the next-generation of Mazda’s rotary engine has been in development since 2007, and has been the subject of several TTAC Wild-Ass Rumors, WardsAuto reports that the unique engine design could well be reaching the end of its life.

Kiyoshi Fujiwara, Mazda executive officer-product planning and powertrain development, says there is “huge discussion” within the Hiroshima, Japan-based company whether to continue on with a rotary engine.

Fujiwara says economic hardship has some top brass looking for programs to cut, and that the engine program is on the list.

Continuing development of the rotary has been halted for now, but he hopes it will resume in the future, noting the technology is a part of Mazda’s DNA.

Without identifying what exactly they are, Fujiwara says three major problems were identified with the current generation of rotary engine, but that two of the three have been overcome. Still, Mazda says that only one thing will save the rotary engine at this point: success with Mazda’s new suite of SKYACTIV technologies. If these fuel-saving measures spark new interest in the Mazda brand, says Fujiwara, then Mazda might have enough cash to invest in its rotary engine. Alternatively, a Mazda-developed Wankel engine could be used as an electric range-extender. In any case, don’t expect a new Mazda rotary before 2017… if ever. Here’s hoping Mazda is able to keep this unique, distinctive drivetrain alive for future generations of enthusiast drivers.

Someone is fanning the flames between Volkswagen and Suzuki, and we aren’t talking flames of love. Today, the German Platow Brief reported a bit belatedly that the German-Nipponese alliance is on the ropes. Something that the attentive reader of TTAC has known for quite a while and as always free of charge. The expensive subscription to the German financial newsletter is not in our editorial budget. A friend of TTAC sent us today’s Platow missive, which can’t be found on-line. After going through the usual blah-blah, the letter drops a high explosive bomb: Read More >

With BMW breaking new eco-friendly premium ground with its “i”-branded concepts, it seems Audi does not want to be out-greened… or out-weirded. This “Audi e-tron Urban Concept” was seen in Berlin’s Potsdammer Platz, ahead of its introduction at the forthcoming Frankfurt Auto Show, where we’ll doubtless learn more about why this is the future for environmentally correct urban dwellers. For now though, all we know is that it’s heavily Messerschmitt Kabinenroller-inspired, as Autobild reports that it features tandem seating and a slide-back canopy along with its modern carbon fiber construction and electric drivetrain. From the look of this video though, the most surprising part of this car (to Berliners, anyway) appears to the Audi badge. What a strange new world we live in…

Photo enforcement vendor American Traffic Solutions (ATS) could find itself in trouble for lying before the Washington Supreme Court about its involvement in attempts to overturn a ballot initiative in Mukilteo last year. The Everett Herald newspaper obtained emails from former ATS Vice President Bill Kroske that show he attempted to collude with the city’s mayor to deny the public an opportunity to vote on banning red light cameras and speed cameras.

Read More >

Chrysler spent a couple of decades selling Mitsubishis and Simcas with Dodge and Plymouth badges in North America, and the Mitsubishi Galant/Lancer-based Colt line went through the most twists and turns. At first, Plymouth-branded Colts were sold as Champs, but by the mid-1980s both the Dodge and Plymouth versions were called Colts. The difference? Damn if I can find one that goes deeper than emblems. Read More >

What does one say about a clip like this? Besides, perhaps, that I hope you all are enjoying your weekend as much as this guy. Meanwhile, hit the jump for what I believe to be the inspiration for this “project” (if, in fact, it was inspired by more than a bottle of vodka)…
Read More >

Within the next ten years, the car industry will change more than in the past fifty years. At least at Volkswagen, says Audi Chief Rupert Stadler. Platforms are a thing of the last century. The future of the car industry is kit cars. Or make that cars designed and built using elements of a common kit architecture. Currently, there are two families of erector kits which can be assembled into all kinds of cars at Volkswagen. They have Teutonic names like “Modularer Querbaukasten” (MQB)  and “Modularer Längsbaukasten” (MLB). Porsche is developing a “MMB” (Modularer Mittelbaukasten) for Mittelmotor (mid-engined) cars. Or possibly a MSB (Modularer Standardbaukasten), which could be the Mutter of all Baukasten.

Audi is already working with the MLB architecture. This coming year, Volkswagen will start using the MQB. Says Automobilwoche [sub]: Read More >

Saab is living off charitable donations and newly issued stock to allow its workers to live from paycheck to paycheck while doing nothing. Over at the Blog of Good Hope every little donation to the cause is praised as the Final Deliverance. According of a Blog of Good Hope post, representatives of the Chinese savior Pangda  are in Trollhättan this weekend. One of the questions undoubtedly will be “how long, how much?” Or in the language of venture capitalists “how long until we run out of runway?” Read More >

Following strong rhetoric of Japan’s automakers against the strong yen, Nissan appears to take action. According to Reuters, Nissan will “reduce exports by as much as a third and reduce the impact of the yen’s crippling strength.” The move is couched into socially acceptable terms. Read More >

At Volkswagen, the sales chief sits right next to God, or the CEO. Now imagine a sales chief that suddenly find himself with the title “Vice President of Customer Experience” and most likely with the responsibility to increase customer satisfaction like tomorrow – what would you do in his shoes? Polish your resume. This is what Mark Barnes likely is doing right now. Read More >

Japan’s automakers face a problem not seen for a long time: Unfilled job openings. “Automakers and other manufacturers are struggling to fill positions at their domestic factories as they ramp up output to make up for production lost since the March 11 disaster,” says The Nikkei [sub]. Read More >

S.M. writes:

Dear Steve and that other Dude,

As you well know, I am a little hooked on old-school American iron, preferably of the V8, high performance wannabe-GT cum Land Yacht variety. Problem is, they are letting me down in terms of basic transportation to work. Not that my Cougar and Mark VIII are complete turds, that guy with that Piston Slap column would have my ass if it came to that. But the occasional part needs replacement, and every recent modification (defective hi-flow fuel pumps, limited slip differentials assembled rather poorly) left me stranded and car-less for many days…and, well, you see my point.

I have a working budget of anywhere from 20-40k for a vehicle that’s new or lightly used. The ideal vehicle should be well proportioned with good visibility (no buffalo butts, I didn’t go to Industrial Design school for that crap), be RWD and not be a stereotypical European money pit that’s nearly impossible to repair in my garage. The ability to tune/tweak would be a plus and being more practical than my two coupes wouldn’t hurt, either. Not that I want another tuner car that’ll leave me stranded for one reason or another. Oh, and a stick would be nice.

Help!

PS: I am not interested in Panther Love. I wish you people would stop pushing these damn things on your readers. The only ones I’d consider are the “fat panthers” from the mid-90s with all the good stuff inside. I am not interested in taking a new, reliable “skinny” one and making it fat with parts from the junkyard. Been there, done that and already won the Fox Body trophies.

Read More >

How do you replace a classic? That’s the question puzzling Tata-owned Land Rover, as it begins considering replacement strategies for its iconic Defender SUV. According to Autocar, a concept is coming to the Frankfurt Auto Show this fall which will point the direction for a new Defender, but all the details remain up in the air. One option is to redesign the whole thing from the ground up with a bespoke platform, for maximum off-road ability. The other option:

using a cost and complication-reduced Discovery chassis

According to Autocar’s reporting, a production version is expected in the 2015 timeframe, with 60k-80k annual unit volume targeted. The key issues are the ability to offer multiple body types and to be repairable even in remote locations, and dealing with the first issue will require a decision on whether or not to build a pickup version. Brand director John Edwards says

that Land Rover is keenly watching the progress of the Argentina-built VW Amarok pick-up – some inside JLR argue that VW may struggle to make money because the pick-up market is so competitive. He believes that whatever solution Land Rover finally picks, ‘it won’t please everyone’, because with so many fans and opinions it will be difficult to avoid disappointing some. The challenge is to please most of them and more importantly, attract new buyers to a vehicle of which only 18,000 were made last year.

Mercedes-Benz is currently trying to recapture the number one position in global luxury sales, but  a quality problem on its home turf in Germany seems to be undermining confidence in the brand. Autobild reports that the M272 V6 and M273 V8 engines used a sintered steel timing chain gear made of various materials starting in 2004, but switched to conventional steel in 2006, eliminating the problem with gear wear. The problem: nobody seems to know how many vehicles built between 2004 and 2006 are affected. Mercedes claims, based on secret internal defect tracking, that one percent, or about 1,500 vehicles, are affected. If you have a vehicle with one of these engines built between 04 and 06 and your check engine light comes on, Mercedes encourages you to visit your M-B dealer rather than an independent shop, as Mercedes is offering free repairs to affected customers. And as Autobild’s Matthias Mötsch argues, when your motto is “the best or nothing,” the only answer to a situation like this is to fix 100% of the defects for free.

NHTSA has denied the niche supercar maker Pagani a waiver for advanced airbag requirements for its new Huayra, possibly forcing the Italian firm to delay US sales until 2015. According to the Federal Register[PDF], Pagani

estimated that if the requested exemption were granted, it would sell 35 to 45 vehicles per year, 6 to 12 vehicles of which would be sold in the United States…. [Pagani] submitted projections estimating that if the petition for exemption is denied and no vehicles are sold in the United States, the company would make an estimated €5,398,000 in net income during the period of 2011 through 2014, compared to €8,613,000 in net income during the same period if an exemption were granted.   The company asserted that the difference in gross revenue between granting and denying the exemption is approximately €34,000,000, and the financial records indicate a difference in projected net income of approximately €3,215,000.

Read More >