Best Auxiliary Lights: In a Fog

A proliferation of cheap LEDs has allowed manufacturers to create some powerful lights in very small (and affordable) packages. Your author paid much more than this for a simple set of incandescent fogs of approximately the same size as these unit. Difference was, those old lamps put out as much illumination as a couple of fireflies in a jam jar.

By adding a strip of amber light above and below the bright white LEDs, these lamps can be wired up for extra signal duties or forward-facing clearance markers. The twin rows of LEDs heave out 6K light from their sixteen points, while its aluminium alloy housing is designed to exhaust what little heat these things produce. Life span is an estimated 50,000 hours, meaning you can drive for five hours a day for over 27 years and not have to replace a bulb. At that point, there will probably be other maintenance issues.

I’m listing a brace of Editor’s Choice units in this post, since I’m writing this thing. A good dose of retro cool is fantastic when it’s done right, and this modern take on KC HiLITES is just tremendous. Yes, they still deploy a halogen bulb but are now of a 100-watt rating and can crank out 200,000 candlepower. The system includes a complete relay wiring harness, switch kit, and those too-cool integrated stone guards.

A fog-beam pattern is said to offer improved visibility under rain, fog, snow, and dusty conditions. Just remember that you’re the one mounting these things, not automotive engineers with years of experience. If one illuminates the International Space Station while the other is searching for nightcrawlers, that’s on you.

Cube lights are nothing like cube roots or cubed cheese but they are infinitely more useful than either. Okay, with two rows of three LEDs, they’re technically a small rectangles but nothing rhymes with rectangle. The pod can be adjusted by about 45 degrees, making the alteration of light beam direction much easier.

IP67 waterproof rating means you can dunk these things in 3.3 feet of water for up to thirty minutes without worry. Its construction is also dustproof, according to the seller, so feel free to take them on the Rubicon. A huge sample size of reviews are largely positive, showing these lights mounted on vehicles from Wranglers to F-150s.

At 24,000 lumens, these sub-$30 lights should be capable of illuminating the dark side of the moon. Throwing 240W per pair, they cast a spotlight measuring 15 degrees and a wider beam of 170 degrees. Putting that in perspective, the average vertical range in the visual field of humans is around 150 degrees.

They’re lightweight, too, tipping the scales at just 1.5 pounds each. A die-cast aluminium profile should keep the lamps in good shape for a long time, given its extra resistance to wear and corrosion. The anterior side is covered in a heat sink for optimum cooling. Like others on this list, they should shine brightly for 50,000 hours.

Looking for all the world like a set of arachnid eyes, these round pods dispense with a shiny background between the LEDs and put black plastic in its place instead. This results in a distinctive lamp, one whose symmetrically positioned LEDs are easy to see when turned off. Measuring 7 inches in diameter by 2 inches thick, a quartet of them would line the front of a brodozer quite nicely.

An IP68 waterproof rating should make for a condensation-free performance, while an aluminium housing with heat sinks promote fast cooling. A spot beam throws focused light to add a punch of illumination down the middle of a lane, giving drivers a good distance of vision through the dark. You’d have to be travelling a good clip to overdrive these lights.

Not every aftermarket fog light has to be deadly serious in its work, which is why your author selected these multicolor units from the Vulcan-sounding company called KaTur. Measuring just 3.5 inches in diameter, these little projector pods will snug in behind a grille or into a base model’s empty fog light bucket with ease.

Choose from seven different colors across the RGB spectrum, including blue and red. Note well: any use of those shades on public highways will likely end with a stern impromptu roadside chat with the local gendarmes who get quite cross when civilians flash reds and blues. Output is only 30W max for each light anyway, so best to keep these for the auto show.

If the KC HiLITES listed above are charmingly retro, these things are straight out of an old JC Whitney catalog. Yellow lenses in a chrome housing will look right at home on the bumper of your K5 Blazer or GMC Vandura. Incandescent bulbs, which will surely heave off a lot of heat, are in a housing measuring 5 inches wide by 1.75 inches high and 2.5 inches deep.

Old school screws are used for beam adjustment and seem to be of the type that will rust and seize after the first winter’s use. Standard H1 bulbs are used here, casting a 55W beam of light. The lone customer review mentions that the lens cracked after cold weather, probably a function of extreme heat and cold cycles. Your author had this same problem with the old aftermarket fogs on his car.

Recall those LED strips of lights sold to jazz up items like toolboxes and car interiors? This nine lamp unit takes the same tack, as it is able to be curved ever so slightly around a car’s bodywork or truck’s bull bar. This flexible installation is marketed as good for auxiliary backup lights, turn signals, or fog lamps.

Equipped with 3M tape on its anterior side, these things are just about ten inches long and not quite an inch high, meaning the opportunity for creative placement is high. Customers report the connecting wires are small and thin but have plenty of slack with which to work. Recommendations abound to add your own adhesive in addition to the 3M gunk.